Categories
Contact Us
  • TEL: +86 (0)632 2528333
  • FAX: +86 (0)632 2528007
  • E-mail:sinchem@188.com
  • ZIP:277533
  • ADD:Xinxu Industrial Park Dongguo Town,Tengzhou city, Shandong Province,China.
Your present location:HOME >> Consultation>>What affect the silica gel in quality (1)
What affect the silica gel in quality (1)
Abstract:
The main ingredient of  silica gel is SiO 2 · nH2O, is a well-developed pore structure of porous material. 
Mainly used as sorbent, desiccant and catalyst carrier. According to their 
Pore ​​size distribution can be divided into coarse, pore, pore surface area than the coarse 
Large. The adsorption of water vapor selective at low humidity, 
Large pore gel adsorption, at high humidity, the coarse gel adsorption 
Larger, high-quality silica gel apparent smooth, glistening. From 
Coarse to the pore, milky white, translucent, transparent spherical particles. 
Poor quality of the silica gel, developed pore structure, adsorption is low, there is apparent 
Crack, intensity difference, hair, dirt and not translucent. Analysis of the main reasons the original 
Materials, process indicators, the level of equipment and operating techniques. 
2 main reasons - raw materials 
Sodium 211 
21,111 high iron content, will cause yellow silicone. GBö4209- 
96 in the liquid sodium silicate iron content 0.02%, with this raw material production 
Content of silica Fe2O 3 200 ~ 300ppm. Just the production of silicon 
Plastic appearance can, place a long time, Fe2 + oxidation of all 
Fe3 +, silica gel into a deep yellow. 
21112 A l2O 3, T iO 2, CaO, M gO high of silica gel 
Transparency and strength, the metal oxide content is too high, not only sodium 
Difficult to dissolve, but also filtering is unclear, and even lead to the production of silicone 
No gelation. 
21113 Water insoluble high, affecting the transparency of silica gel, hair, dirt and will 
Silica caused more cracks, more than the production of silicone rubber flap. 
212 sulfuric acid 
21211 sulfuric acid color must be clear and transparent, to the small settlement of 48 
Time before use, otherwise, the apparent impact of silica gel. 
21212 heavy metal content, will affect the gel strength. 
In short, the production of raw materials, silica gel was very strict, to control 
A l2O 3, Fe2O 3, T iO 2, CaO, M gO and other impurities, with this 
Kinds of raw materials to produce the appearance of fine silica gel, place a long time is not yellow.